hwaog.blogg.se

Tower 3d pro commands
Tower 3d pro commands













tower 3d pro commands

Too close together and your nozzle will crash into your print and wreck it. Too far away and you will not get proper layer adhesion. To properly space your bed away from your nozzle, you want them close enough together that when you have a single sheet of paper between the bed and nozzle there should be a slight amount of friction when you try to move the paper. Turning the knob to the left raises the bed towards the print nozzle, turning it to the right lowers the bed. There are 4 knobs, one on each corner of the bed, that will raise and lower that corner. Once the printer is assembled the next vital step is to make sure the bed is level in relation to the print head. If you want to use different test prints feel free to look around, there are lots of options.

tower 3d pro commands

I do not have affiliation with any of these authors (except myself lol), I am simply providing access to the files I used to set up my printer. I will be linking to a bunch of different 3D print files that I found on Thingiverse. Sorry that I did not take pictures of the assembly process, but the process is straight forward and the images in the instruction manual are easy to understand. Once that is completed, you only have a few more bolts to tighten up and a couple of wires to plug in and your printer is ready to start printing. The gantry will control the X (left and right) and Z (up and down) axis movement. Then you connect the gantry arm to the uprights.

tower 3d pro commands

Once you unpack everything you will need to attach the uprights to the base. Fortunately several decades of assembling Lego kits served me well in figuring out what needed to be done. The instructions that come with the printer do not have words, just pictures. To finish putting the printer together will require connecting the remaining parts to the base using less than 2 dozen bolts, and then plugging up a few wires to the various motors. The base of the printer containing the print bed and the Y axis (back and forth) control as well as most of the wiring are already assembled before leaving the factory. The Ender 3 Pro comes partially assembled.















Tower 3d pro commands